Original file

Volkswagen Passat 2.0 TDI Bosch EDC17C74 04L906026KA / 10SW025087 1274N9K5

An original (stock) flash read of the Bosch EDC17C74 control unit, fitted in Volkswagen Passat 2.0 TDI, hardware number 04L906026KA and software number 10SW025087 1274N9K5, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Passat 2.0 TDI2.0 diesel 190.0PS / 139.7kW
Control unit
Bosch EDC17C74
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906026KA
Software number
10SW025087 1274N9K5
Bosch part / software
10SW025087
Vehicle maker's hardware number
04L907309P

Technical data

Vehicle
BrandVolkswagen
Car modelPassat 2.0 TDI
Engine2.0 diesel 190.0PS / 139.7kW
Control unit
Control unitBosch EDC17C74
ECU makerBosch
Hardware number04L906026KA
Software number10SW025087 1274N9K5
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key84078205a0b37e01
Identification read from the file
ECU nameEDC17C74
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW025087Offset in the file: 0x02001A
Vehicle maker's hardware number04L907309POffset in the file: 0x3CE7F0
Software / calibration04L906026KA · version 4069Offset in the file: 0x3CE80A
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x217E50
Bosch project identifier (EPK)36/1/EDC17C74/5/P1274//C1274DN9K5///Offset in the file: 0x04C55C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906026KA and software number 10SW025087 1274N9K5. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C74

HardwareSoftwareVehicles
04L906026KA025087Škoda Superb 2.0 TDI
04L906026KA036153Škoda Superb 3 2.0 TDI, Škoda Superb 2.0 TDI
04L906026KA04L906026KAŠkoda Superb 3
04L906026KA10SW025087Volkswagen Passat
04L906026KA10SW036153Škoda Superb, Škoda pcmflash, Škoda Octavia
04L906026KA10SW036153 1274N9K7Škoda Superb 3 2.0 TDI
04L906026KB10SW025413Škoda Superb 3
04L906026KC04L906026KCVolkswagen Arteon

Bosch EDC17C74 original files

The Bosch EDC17C74 unit page