Original file

Volkswagen Golf 2.0 TFSI Bosch EDC17C74 04L906026LQ / SC800O3000000

An original (stock) flash read of the Bosch EDC17C74 control unit, fitted in Volkswagen Golf 2.0 TFSI, hardware number 04L906026LQ and software number SC800O3000000, 8,704.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Golf 2.0 TFSI2.0 petrol 299.9PS / 220.6kW
Control unit
Bosch EDC17C74
Read type
Full read (boot area included)
File
8,704.00 KB · Flash
Hardware number
04L906026LQ
Software number
SC800O3000000
Bosch part / software
10SW025166
Vehicle maker's hardware number
04L907309P

Technical data

Vehicle
BrandVolkswagen
Car modelGolf 2.0 TFSI
Engine2.0 petrol 299.9PS / 220.6kW
Control unit
Control unitBosch EDC17C74
ECU makerBosch
Hardware number04L906026LQ
Software numberSC800O3000000
File
File typeOriginal flash read
File size8,704.00 KB (8,912,896 bytes)
File key02de52807dc9ce9b
Identification read from the file
ECU nameEDC17C74
Read typeFull read (boot area included)
Bosch part / software10SW025166Offset in the file: 0x78301A
Vehicle maker's hardware number04L907309POffset in the file: 0x84E7F0
Software / calibration04L906026LQ · version 5172Offset in the file: 0x84E80A
Bosch project identifier (EPK)36/1/EDC17C74/5/P1274//C1274DN9K5///Offset in the file: 0x7847FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906026LQ and software number SC800O3000000. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C74

HardwareSoftwareVehicles
04L906026LP10SW074377Seat
04L906026LQ025166Škoda Octavia 3 2.0 TDI CR DPF
04L906026LQ04L906026LQVolkswagen pcmflash, Volkswagen Superb 3, Škoda
04L906026LQ10SW025166Škoda Superb 3, Audi
04L906026MA04L907309PVolkswagen Passat
04L906026MA10SW045693Volkswagen Passat, Volkswagen Superb 3, Škoda
04L906026MB10SW025167Mercedes-Benz pcmflash
04L906026MG10SW010619Audi pcmflash

Bosch EDC17C74 original files

The Bosch EDC17C74 unit page