Original file

Škoda Superb 3 Bosch EDC17C74 04L906026MT / 1037552303

An original (stock) flash read of the Bosch EDC17C74 control unit, fitted in Škoda Superb 3, hardware number 04L906026MT and software number 1037552303, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Superb 32.0 diesel 140KW
Control unit
Bosch EDC17C74
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906026MT
Software number
1037552303
Bosch part / software
10SW008723
Vehicle maker's hardware number
04L907309M

Technical data

Vehicle
BrandŠkoda
Car modelSuperb 3
Engine2.0 diesel 140KW
Control unit
Control unitBosch EDC17C74
ECU makerBosch
Hardware number04L906026MT
Software number1037552303
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key2260567713ad7fe5
Identification read from the file
ECU nameEDC17C74
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW008723Offset in the file: 0x02001A
Vehicle maker's hardware number04L907309MOffset in the file: 0x3C5130
Software / calibration04L906026MT · version 3076Offset in the file: 0x3C514A
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x217E50
Bosch project identifier (EPK)36/1/EDC17C74/5/P1274//C1274DN8K3///Offset in the file: 0x04F47C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906026MT and software number 1037552303. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C74

HardwareSoftwareVehicles
04L906026MP10SW052922Audi
04L906026MS10SW082795Volkswagen Golf
04L906026MT008723Škoda Octavia 2.0 TDI 4X4 6AT - 184hp
04L906026MT04L906026MTŠkoda Superb 3, Škoda pcmflash, Audi
04L906026MT1037552579Škoda Superb 3, Škoda Superb
04L906026MT10SW008723Škoda Superb 2
04L906026MT10SW008723 1274N8K3Škoda Superb 2.0 TDI
04L906026MT10SW020918Škoda Passat, Škoda Superb 3, Volkswagen

Bosch EDC17C74 original files

The Bosch EDC17C74 unit page