Original file

Škoda Superb 3 Bosch EDC17C74 04L906026MT / 10SW020918

An original (stock) flash read of the Bosch EDC17C74 control unit, fitted in Škoda Superb 3, hardware number 04L906026MT and software number 10SW020918, 4,256.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Superb 32.0 diesel 190PS
Control unit
Bosch EDC17C74
Read type
Full read (boot area included)
File
4,256.00 KB · Flash
Hardware number
04L906026MT
Software number
10SW020918
Vehicle maker's hardware number
04L907309M

Technical data

Vehicle
BrandŠkoda
Car modelSuperb 3
Engine2.0 diesel 190PS
Power190.0PS / 139.7kW
Control unit
Control unitBosch EDC17C74
ECU makerBosch
Hardware number04L906026MT
Software number10SW020918
File
File typeOriginal flash read
File size4,256.00 KB (4,358,144 bytes)
File key42e3aef84570bcec
Identification read from the file
ECU nameEDC17C74
Read typeFull read (boot area included)
Bosch part / software10SW020918Offset in the file: 0x30301A
Vehicle maker's hardware number04L907309MOffset in the file: 0x3C5D1C
Software / calibration04L906026MT · version 4775Offset in the file: 0x3C5D36
Bosch project identifier (EPK)36/1/EDC17C74/5/P1274//C1274DN8L1///Offset in the file: 0x3047FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906026MT and software number 10SW020918. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
ŠkodaFlash4,096.00 KB€15Add to cart
Volkswagen PassatFlash4,096.00 KB€15Add to cart

All reads of 04L906026MT / 10SW020918

Other pairs of Bosch EDC17C74

HardwareSoftwareVehicles
04L906026MT1037552303Škoda Superb 3
04L906026MT1037552579Škoda Superb 3, Škoda Superb
04L906026MT10SW008723Škoda Superb 2
04L906026MT10SW008723 1274N8K3Škoda Superb 2.0 TDI
04L906026NA008724Škoda Superb 3 2.0 TDI, Škoda Superb 2.0 TDI
04L906026NA04L906026NAŠkoda Superb 3, Škoda pcmflash, Audi
04L906026NA10SW008724Škoda Superb 3
04L906026NF040674Seat Leon 2.0 TDI, Seat Octavia 3 2.0 TDI, Seat Golf 2.0 TDI

Bosch EDC17C74 original files

The Bosch EDC17C74 unit page