Original file

Audi A3 Bosch EDC17C74 04L906026NF / 04L906026NF

An original (stock) flash read of the Bosch EDC17C74 control unit, fitted in Audi A3, hardware number 04L906026NF and software number 04L906026NF, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A32.0 diesel 110KW
Control unit
Bosch EDC17C74
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906026NF
Software number
04L906026NF
Bosch part / software
10SW040674
Vehicle maker's hardware number
04L907309P

Technical data

Vehicle
BrandAudi
Car modelA3
Engine2.0 diesel 110KW
Control unit
Control unitBosch EDC17C74
ECU makerBosch
Hardware number04L906026NF
Software number04L906026NF
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key0d190f7e2e301e13
Identification read from the file
ECU nameEDC17C74
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW040674Offset in the file: 0x02001A
Vehicle maker's hardware number04L907309POffset in the file: 0x3D07C8
Software / calibration04L906026NF · version 6380Offset in the file: 0x3D07E2
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x217E50
Bosch project identifier (EPK)36/1/EDC17C74/5/P1274//C1274DN9PL///Offset in the file: 0x04CAB0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906026NF and software number 04L906026NF. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Seat LeonFlash4,096.00 KB€15Add to cart

All reads of 04L906026NF / 04L906026NF

Other pairs of Bosch EDC17C74

HardwareSoftwareVehicles
04L906026NA008724Škoda Superb 3 2.0 TDI, Škoda Superb 2.0 TDI
04L906026NA04L906026NAŠkoda Superb 3, Škoda pcmflash, Audi
04L906026NA10SW008724Škoda Superb 3
04L906026NF040674Seat Leon 2.0 TDI, Seat Octavia 3 2.0 TDI, Seat Golf 2.0 TDI
04L906026NF10SW040674Volkswagen Tiguan, Audi
04L906026NF10SW040674 1274N9PLŠkoda Octavia 3 2.0 TDI
04L906026NF10SW049188Škoda Octavia 3, Škoda A3, Seat
04L906026NF10SW058937Seat

Bosch EDC17C74 original files

The Bosch EDC17C74 unit page