Original file

Audi A4 Bosch EDC17C74 04L906026PE / 10SW085949

An original (stock) flash read of the Bosch EDC17C74 control unit, fitted in Audi A4, hardware number 04L906026PE and software number 10SW085949, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A42.0 diesel 122PS
Control unit
Bosch EDC17C74
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906026PE
Software number
10SW085949
Vehicle maker's hardware number
04L907309L

Technical data

Vehicle
BrandAudi
Car modelA4
Engine2.0 diesel 122PS
Power122.4PS / 90.0kW
Control unit
Control unitBosch EDC17C74
ECU makerBosch
Hardware number04L906026PE
Software number10SW085949
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keycc830f98342797a0
Identification read from the file
ECU nameEDC17C74
Read typeFull read (boot area included)
Bosch part / software10SW085949Offset in the file: 0x02001A
Vehicle maker's hardware number04L907309LOffset in the file: 0x3CEC0A
Software / calibration04L906026PE · version 7768Offset in the file: 0x3CEC24
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x217E50
Bosch project identifier (EPK)36/1/EDC17C74/5/P1274//C1274DL9T2///Offset in the file: 0x22F56F

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906026PE and software number 10SW085949. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C74

HardwareSoftwareVehicles
04L906026PE04L906026PEAudi A4
04L906026PE10SW037814Audi A4
04L906026PE10SW044214Audi A4
04L906026PE10SW044214 1274L9S0Audi A4 30 TDI
04L906026PH037815Audi A4, Audi A4 2.0 TDI, Audi A5 2.0 TDI
04L906026PH04L906026PHAudi A4, Audi B9-FL
04L906026PH04L907309LAudi A1, Audi A4
04L906026PH10SW037815Audi A4, Audi A5

Bosch EDC17C74 original files

The Bosch EDC17C74 unit page