Original file

Audi A4 2.0 TDI Bosch EDC17C74 04L906026QA / 044215

An original (stock) flash read of the Bosch EDC17C74 control unit, fitted in Audi A4 2.0 TDI, hardware number 04L906026QA and software number 044215, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A4 2.0 TDI2.0 diesel 190.3PS / 140.0kW
Control unit
Bosch EDC17C74
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906026QA
Software number
044215
Bosch part / software
10SW044215
Vehicle maker's hardware number
04L907309L

Technical data

Vehicle
BrandAudi
Car modelA4 2.0 TDI
Engine2.0 diesel 190.3PS / 140.0kW
Control unit
Control unitBosch EDC17C74
ECU makerBosch
Hardware number04L906026QA
Software number044215
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key952a9666dd78f9b8
Identification read from the file
ECU nameEDC17C74
Read typeFull read (boot area included)
Bosch part / software10SW044215Offset in the file: 0x02001A
Vehicle maker's hardware number04L907309LOffset in the file: 0x3CF25A
Software / calibration04L906026QA · version 6772Offset in the file: 0x3CF274
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x217E50
Bosch project identifier (EPK)36/1/EDC17C74/5/P1274//C1274DL9S0///Offset in the file: 0x22F56E

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906026QA and software number 044215. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C74

HardwareSoftwareVehicles
04L906026PS10SW037846Audi
04L906026PT10SW037808Audi pcmflash
04L906026Q10SW006247Volkswagen pcmflash
04L906026QA037816Audi A4 2.0 TDI CR
04L906026QA04L907309LAudi A5
04L906026QA10SW037816Audi A4, Audi A5
04L906026QA10SW037816 1274L9Q5Audi A4 2.0 TDI, Audi A5 2.0 TDI
04L906026QA10SW044215Audi A4, Audi A5

Bosch EDC17C74 original files

The Bosch EDC17C74 unit page