Original file

Audi A3 Bosch EDC17C74 04L906026QG / 04L906026QG

An original (stock) flash read of the Bosch EDC17C74 control unit, fitted in Audi A3, hardware number 04L906026QG and software number 04L906026QG, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A32.0 diesel 110KW
Control unit
Bosch EDC17C74
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
04L906026QG
Software number
04L906026QG
Bosch part / software
10SW041309
Vehicle maker's hardware number
04L907309P

Technical data

Vehicle
BrandAudi
Car modelA3
Engine2.0 diesel 110KW
Control unit
Control unitBosch EDC17C74
ECU makerBosch
Hardware number04L906026QG
Software number04L906026QG
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyb76b7dd0d6d55859
Identification read from the file
ECU nameEDC17C74
Read typeCalibration only (data set)
Bosch part / software10SW041309Offset in the file: 0x30301A
Vehicle maker's hardware number04L907309POffset in the file: 0x3D07C8
Software / calibration04L906026QG · version 6490Offset in the file: 0x3D07E2
Bosch project identifier (EPK)36/1/EDC17C74/5/P1274//C1274DN9PL///Offset in the file: 0x3047FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906026QG and software number 04L906026QG. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C74

HardwareSoftwareVehicles
04L906026QE10SW025048 1274N9KAVolkswagen Touran 1.6 TDI
04L906026QF04L906026QFVolkswagen Touran
04L906026QF10SW025024Volkswagen Touran
04L906026QF10SW025024 1274N9KAVolkswagen Touran 1.6 TDI
04L906026QG10SW041309Audi A3, Volkswagen
04L906026QG10SW049371Volkswagen
04L906026QH04L906026QHVolkswagen Tiguan, Volkswagen Touran
04L906026QH10SW049373Volkswagen

Bosch EDC17C74 original files

The Bosch EDC17C74 unit page