Original file

Audi A3 2019y Bosch EDC17C74 04L906027AA / 10SW008676

An original (stock) flash read of the Bosch EDC17C74 control unit, fitted in Audi A3 2019y, hardware number 04L906027AA and software number 10SW008676, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A3 2019yDJGA
Control unit
Bosch EDC17C74
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906027AA
Software number
10SW008676
Bosch part / software
10SW049686
Vehicle maker's hardware number
04L907309P

Technical data

Vehicle
BrandAudi
Car modelA3 2019y
EngineDJGA
Control unit
Control unitBosch EDC17C74
ECU makerBosch
Hardware number04L906027AA
Software number10SW008676
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameAudi A3 2019y
File key3441a1a17684f955
Identification read from the file
ECU nameEDC17C74
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW049686Offset in the file: 0x02001A
Vehicle maker's hardware number04L907309POffset in the file: 0x3CED1C
Software / calibration04L906027AA · version 9525Offset in the file: 0x3CED36
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x217E50
Bosch project identifier (EPK)36/1/EDC17C74/5/P1274//C1274DN9PM///Offset in the file: 0x04CA70

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906027AA and software number 10SW008676. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C74

HardwareSoftwareVehicles
04L906026TT10SW048895Volkswagen Tiguan
04L906027AA049686Audi A3 2.0 TDI CR
04L906027AA04L906027AAAudi A3
04L906027AA04L907309PŠkoda Octavia 3, Škoda RS, Volkswagen
04L906027AA10SW049686Škoda Octavia, Škoda Octavia 3
04L906027AA10SW049686 1274N9PMŠkoda Octavia 2.0 TDI RS
04L906027AB049884Seat Altea 2.0 TDI
04L906027AB10SW049884Seat Ateca, Seat Karoq, Seat T-Roc

Bosch EDC17C74 original files

The Bosch EDC17C74 unit page