Original file

Seat Ateca 2.0 TDI Bosch EDC17C74 04L906027AC / 048698

An original (stock) flash read of the Bosch EDC17C74 control unit, fitted in Seat Ateca 2.0 TDI, hardware number 04L906027AC and software number 048698, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat Ateca 2.0 TDI2.0 diesel 149.4PS / 109.9kW
Control unit
Bosch EDC17C74
Read type
Full read (boot area included)
File
8,192.00 KB · Flash
Hardware number
04L906027AC
Software number
048698
Bosch part / software
10SW048698
Vehicle maker's hardware number
04L907309P

Technical data

Vehicle
BrandSeat
Car modelAteca 2.0 TDI
Engine2.0 diesel 149.4PS / 109.9kW
Control unit
Control unitBosch EDC17C74
ECU makerBosch
Hardware number04L906027AC
Software number048698
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key483cb10798e05097
Identification read from the file
ECU nameEDC17C74
Read typeFull read (boot area included)
Bosch part / software10SW048698Offset in the file: 0x2B301A
Vehicle maker's hardware number04L907309POffset in the file: 0x37ED1C
Software / calibration04L906027AC · version 9498Offset in the file: 0x37ED36
Bosch project identifier (EPK)36/1/EDC17C74/5/P1274//C1274DN9PM///Offset in the file: 0x2B47FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906027AC and software number 048698. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C74

HardwareSoftwareVehicles
04L906027AA10SW049686Škoda Octavia, Škoda Octavia 3
04L906027AA10SW049686 1274N9PMŠkoda Octavia 2.0 TDI RS
04L906027AB049884Seat Altea 2.0 TDI
04L906027AB10SW049884Seat Ateca, Seat Karoq, Seat T-Roc
04L906027AC04L906027ACVolkswagen T-Roc
04L906027AC10SW048698Seat Ateca, Seat T-Roc, Audi/Skoda/Seat/VW
04L906027AE049346Seat Altea 2.0 TDI
04L906027AE04L906027AEŠkoda Karoq

Bosch EDC17C74 original files

The Bosch EDC17C74 unit page