Original file

Seat Ateca 2.0 TDI Bosch EDC17C74 04L906027AF / 048936

An original (stock) flash read of the Bosch EDC17C74 control unit, fitted in Seat Ateca 2.0 TDI, hardware number 04L906027AF and software number 048936, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat Ateca 2.0 TDI2.0 diesel 190.3PS / 140.0kW
Control unit
Bosch EDC17C74
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906027AF
Software number
048936
Bosch part / software
10SW048936
Vehicle maker's hardware number
04L907309P

Technical data

Vehicle
BrandSeat
Car modelAteca 2.0 TDI
Engine2.0 diesel 190.3PS / 140.0kW
Control unit
Control unitBosch EDC17C74
ECU makerBosch
Hardware number04L906027AF
Software number048936
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyb41885299669eb81
Identification read from the file
ECU nameEDC17C74
Read typeFull read (boot area included)
Bosch part / software10SW048936Offset in the file: 0x30301A
Vehicle maker's hardware number04L907309POffset in the file: 0x3CED1C
Software / calibration04L906027AF · version 7319Offset in the file: 0x3CED36
Bosch project identifier (EPK)36/1/EDC17C74/5/P1274//C1274DN9PM///Offset in the file: 0x3047FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906027AF and software number 048936. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C74

HardwareSoftwareVehicles
04L906027AC10SW048698Seat Ateca, Seat T-Roc, Audi/Skoda/Seat/VW
04L906027AE049346Seat Altea 2.0 TDI
04L906027AE04L906027AEŠkoda Karoq
04L906027AE10SW049346Škoda Karoq, Škoda T-Roc, Volkswagen
04L906027AF04L906027AFŠkoda Kodiaq
04L906027AF10SW030954Škoda Kodiaq
04L906027AF10SW048936Seat
04L906027AF10SW060477Škoda

Bosch EDC17C74 original files

The Bosch EDC17C74 unit page