Original file

Seat Bosch EDC17C74 04L906027AG / 10SW058939

An original (stock) flash read of the Bosch EDC17C74 control unit, fitted in Seat, hardware number 04L906027AG and software number 10SW058939, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat2.0 diesel 149PS
Control unit
Bosch EDC17C74
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906027AG
Software number
10SW058939
Vehicle maker's hardware number
04L907309P

Technical data

Vehicle
BrandSeat
Engine2.0 diesel 149PS
Power149.6PS / 110.0kW
Control unit
Control unitBosch EDC17C74
ECU makerBosch
Hardware number04L906027AG
Software number10SW058939
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key48e29c2eac54511e
Identification read from the file
ECU nameEDC17C74
Read typeFull read (boot area included)
Bosch part / software10SW058939Offset in the file: 0x02001A
Vehicle maker's hardware number04L907309POffset in the file: 0x3CED1C
Software / calibration04L906027AG · version 9970Offset in the file: 0x3CED36
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x217E50
Bosch project identifier (EPK)36/1/EDC17C74/5/P1274//C1274DN9PM///Offset in the file: 0x04CA70

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906027AG and software number 10SW058939. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C74

HardwareSoftwareVehicles
04L906027AF10SW060477Škoda
04L906027AG049191Volkswagen Golf 2.0 TDI
04L906027AG04L906027AGAudi A3
04L906027AG10SW049191Audi A3, Audi Octavia 2, Seat
04L906027AK10SW046918Audi
04L906027AL046081Audi Q5 2.0 TDI
04L906027AL04L907309LAudi A4
04L906027AL10SW046081Audi Q5

Bosch EDC17C74 original files

The Bosch EDC17C74 unit page