Original file

Audi A4 Bosch EDC17C74 04L906027AL / 04L907309L

An original (stock) flash read of the Bosch EDC17C74 control unit, fitted in Audi A4, hardware number 04L906027AL and software number 04L907309L, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A42.0 diesel 190PS
Control unit
Bosch EDC17C74
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906027AL
Software number
04L907309L
Bosch part / software
10SW046081

Technical data

Vehicle
BrandAudi
Car modelA4
Engine2.0 diesel 190PS
Control unit
Control unitBosch EDC17C74
ECU makerBosch
Hardware number04L906027AL
Software number04L907309L
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key8027186ea530161a
Identification read from the file
ECU nameEDC17C74
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW046081Offset in the file: 0x02001A
Vehicle maker's hardware number04L907309LOffset in the file: 0x3CF25A
Software / calibration04L906027AL · version 7171Offset in the file: 0x3CF274
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x217E50
Bosch project identifier (EPK)36/1/EDC17C74/5/P1274//C1274DL9S0///Offset in the file: 0x22F56E

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906027AL and software number 04L907309L. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C74

HardwareSoftwareVehicles
04L906027AG10SW049191Audi A3, Audi Octavia 2, Seat
04L906027AG10SW058939Seat
04L906027AK10SW046918Audi
04L906027AL046081Audi Q5 2.0 TDI
04L906027AL10SW046081Audi Q5
04L906027AM10SW046919Audi Q5
04L906027AS10SW046082Audi
04L906027BB10SW046085Audi A4, Audi A5

Bosch EDC17C74 original files

The Bosch EDC17C74 unit page