Original file

Audi A4 Bosch EDC17C74 04L906027BR / 10SW046810

An original (stock) flash read of the Bosch EDC17C74 control unit, fitted in Audi A4, hardware number 04L906027BR and software number 10SW046810, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A42.0 diesel 122PS
Control unit
Bosch EDC17C74
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906027BR
Software number
10SW046810
Vehicle maker's hardware number
04L907309L

Technical data

Vehicle
BrandAudi
Car modelA4
Engine2.0 diesel 122PS
Power122.4PS / 90.0kW
Control unit
Control unitBosch EDC17C74
ECU makerBosch
Hardware number04L906027BR
Software number10SW046810
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key4c67db1d34094493
Identification read from the file
ECU nameEDC17C74
Read typeFull read (boot area included)
Bosch part / software10SW046810Offset in the file: 0x02001A
Vehicle maker's hardware number04L907309LOffset in the file: 0x3CF2BA
Software / calibration04L906027BR · version 7157Offset in the file: 0x3CF2D4
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x217E50
Bosch project identifier (EPK)36/1/EDC17C74/5/P1274//C1274DL9Q5///Offset in the file: 0x22F564

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906027BR and software number 10SW046810. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C74

HardwareSoftwareVehicles
04L906027BL10SW050051Audi
04L906027BQ04L906027BQVolkswagen T-Roc
04L906027BQ10SW049345Volkswagen T-Roc
04L906027BR046810Audi A4 2.0 TDI
04L906027BS04L906027BSVolkswagen Tiguan
04L906027BS10SW056197Volkswagen Touran
04L906027BT10SW056141Volkswagen Tiguan
04L906027CA10SW048380Audi

Bosch EDC17C74 original files

The Bosch EDC17C74 unit page