Original file

Volkswagen Bosch EDC17C74 04L906027CD / 10SW085516

An original (stock) flash read of the Bosch EDC17C74 control unit, fitted in Volkswagen, hardware number 04L906027CD and software number 10SW085516, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen2.0 diesel 149PS
Control unit
Bosch EDC17C74
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906027CD
Software number
10SW085516
Vehicle maker's hardware number
04L907309P

Technical data

Vehicle
BrandVolkswagen
Engine2.0 diesel 149PS
Power149.6PS / 110.0kW
Control unit
Control unitBosch EDC17C74
ECU makerBosch
Hardware number04L906027CD
Software number10SW085516
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyc94c69ba95a604f1
Identification read from the file
ECU nameEDC17C74
Read typeFull read (boot area included)
Bosch part / software10SW085516Offset in the file: 0x02001A
Vehicle maker's hardware number04L907309POffset in the file: 0x3CF578
Software / calibration04L906027CD · version 9972Offset in the file: 0x3CF592
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x217E50
Bosch project identifier (EPK)36/1/EDC17C74/5/P1274//C1274DN9PP///Offset in the file: 0x04CB44

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906027CD and software number 10SW085516. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C74

Bosch EDC17C74 original files

The Bosch EDC17C74 unit page