Original file

BMW X5 SUV Bosch EDC17C76 O_7UCA2-00002972-101 / 1037550618

An original (stock) flash read of the Bosch EDC17C76 control unit, fitted in BMW X5 SUV, hardware number O_7UCA2-00002972-101 and software number 1037550618, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW X5 SUV3.0 diesel 258PS
Control unit
Bosch EDC17C76
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
O_7UCA2-00002972-101
Software number
1037550618

Technical data

Vehicle
BrandBMW
Car modelX5 SUV
Engine3.0 diesel 258PS
Power258.3PS / 190.0kW
Control unit
Control unitBosch EDC17C76
ECU makerBosch
Hardware numberO_7UCA2-00002972-101
Software number1037550618
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key009cc4c510f762d8
Identification read from the file
ECU nameEDC17C76
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software1037550618Offset in the file: 0x01801A
Data set descriptionN57D30O1-F15N57O1_US_NTAGR
Bosch project identifier (EPK)34/1/EDC17_C76/11/P_1371//VUCA2///Offset in the file: 0x25BCD4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C76 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number O_7UCA2-00002972-101 and software number 1037550618. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C76

Bosch EDC17C76 original files

The Bosch EDC17C76 unit page