Original file

Jeep Cherokee Bosch EDC17C79 0700771060 / 10SW070077

An original (stock) flash read of the Bosch EDC17C79 control unit, fitted in Jeep Cherokee, hardware number 0700771060 and software number 10SW070077, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Cherokee3.0 diesel · 190.0PS / 139.7kW
Control unit
Bosch EDC17C79
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0700771060
Software number
10SW070077
Software / calibration
P_1060_EDC17C79_W270

Technical data

Vehicle
BrandJeep
Car modelCherokee
Engine3.0 diesel
Power190.0PS / 139.7kW
Control unit
Control unitBosch EDC17C79
ECU makerBosch
Hardware number0700771060
Software number10SW070077
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key45bd7c2007a0fdbc
Identification read from the file
ECU nameEDC17C79
Read typeOBD read (no boot area)
Bosch part / software10SW070077Offset in the file: 0x14001A
Software / calibrationP_1060_EDC17C79_W270Offset in the file: 0x000228
Bosch project identifier (EPK)51/1/EDC17_C79/1060/P_1060//P_1060_EDC17C79_W270///Offset in the file: 0x000228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C79 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0700771060 and software number 10SW070077. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C79

HardwareSoftwareVehicles
058155106010SW058155Dodge Ram
058600106010SW058600Dodge Ram
067003815010SW024810Maserati Ghibli
070005106010SW070005Jeep Grand Cherokee
07008710601037527380Jeep Grand Cherokee
070087106010SW070052Jeep Grand Cherokee
070087106010SW070087Jeep Grand Cherokee
07356010601037527380Dodge RAM 3.0L

Bosch EDC17C79 original files

The Bosch EDC17C79 unit page