Original file

Jeep Grand Cherokee Bosch EDC17C79 0700871060 / 10SW070087

An original (stock) flash read of the Bosch EDC17C79 control unit, fitted in Jeep Grand Cherokee, hardware number 0700871060 and software number 10SW070087, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Grand Cherokee3.0 diesel · 250.0PS / 183.9kW
Control unit
Bosch EDC17C79
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0700871060
Software number
10SW070087
Software / calibration
P_1060_EDC17C79_W270

Technical data

Vehicle
BrandJeep
Car modelGrand Cherokee
Engine3.0 diesel
Power250.0PS / 183.9kW
Control unit
Control unitBosch EDC17C79
ECU makerBosch
Hardware number0700871060
Software number10SW070087
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keydc576df9cffe56f0
Identification read from the file
ECU nameEDC17C79
Read typeCalibration only (data set)
Bosch part / software10SW070087Offset in the file: 0x00001A
Software / calibrationP_1060_EDC17C79_W270Offset in the file: 0x000228
Bosch project identifier (EPK)51/1/EDC17_C79/1060/P_1060//P_1060_EDC17C79_W270///Offset in the file: 0x000228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C79 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0700871060 and software number 10SW070087. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C79

HardwareSoftwareVehicles
070005106010SW070005Jeep Grand Cherokee
070077106010SW070077Jeep Cherokee
07008710601037527380Jeep Grand Cherokee
070087106010SW070052Jeep Grand Cherokee
07356010601037527380Dodge RAM 3.0L
07356510601037560089Dodge Ram
073565106010SW073565Dodge Ram
073825106010SW073825Dodge Ram

Bosch EDC17C79 original files

The Bosch EDC17C79 unit page