Original file

Dodge Ram Bosch EDC17C79 0735651060 / 1037560089

An original (stock) flash read of the Bosch EDC17C79 control unit, fitted in Dodge Ram, hardware number 0735651060 and software number 1037560089, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Dodge Ram3.0 diesel · 245.0PS / 180.2kW
Control unit
Bosch EDC17C79
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0735651060
Software number
1037560089
Bosch part / software
10SW073565
Software / calibration
P_1060_EDC17C79_W29A

Technical data

Vehicle
BrandDodge
Car modelRam
Engine3.0 diesel
Power245.0PS / 180.2kW
Control unit
Control unitBosch EDC17C79
ECU makerBosch
Hardware number0735651060
Software number1037560089
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key1344cb7572156d29
Identification read from the file
ECU nameEDC17C79
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW073565Offset in the file: 0x02001A
Software / calibrationP_1060_EDC17C79_W29AOffset in the file: 0x045344
Bosch project identifier (EPK)51/1/EDC17_C79/1060/P_1060//P_1060_EDC17C79_W29A///Offset in the file: 0x045344

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C79 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0735651060 and software number 1037560089. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C79

HardwareSoftwareVehicles
07008710601037527380Jeep Grand Cherokee
070087106010SW070052Jeep Grand Cherokee
070087106010SW070087Jeep Grand Cherokee
07356010601037527380Dodge RAM 3.0L
073565106010SW073565Dodge Ram
073825106010SW073825Dodge Ram
075673106068270624AIJeep Grand Cherokee
103752738010601037527380Dodge Ram

Bosch EDC17C79 original files

The Bosch EDC17C79 unit page