Original file

Dodge Ram Bosch EDC17C79 0738251060 / 10SW073825

An original (stock) flash read of the Bosch EDC17C79 control unit, fitted in Dodge Ram, hardware number 0738251060 and software number 10SW073825, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Dodge Ram3.0 diesel 240PS
Control unit
Bosch EDC17C79
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0738251060
Software number
10SW073825
Software / calibration
P_1060_EDC17C79_W29A

Technical data

Vehicle
BrandDodge
Car modelRam
Engine3.0 diesel 240PS
Power240.0PS / 176.5kW
Control unit
Control unitBosch EDC17C79
ECU makerBosch
Hardware number0738251060
Software number10SW073825
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key83dd8150db22d9ce
Identification read from the file
ECU nameEDC17C79
Read typeOBD read (no boot area)
Bosch part / software10SW073825Offset in the file: 0x14001A
Software / calibrationP_1060_EDC17C79_W29AOffset in the file: 0x000228
Bosch project identifier (EPK)51/1/EDC17_C79/1060/P_1060//P_1060_EDC17C79_W29A///Offset in the file: 0x000228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C79 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0738251060 and software number 10SW073825. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C79

HardwareSoftwareVehicles
070087106010SW070087Jeep Grand Cherokee
07356010601037527380Dodge RAM 3.0L
07356510601037560089Dodge Ram
073565106010SW073565Dodge Ram
075673106068270624AIJeep Grand Cherokee
103752738010601037527380Dodge Ram
1060_EDC17C79_N087_11037527380Jeep Grand Cherokee
10SW0026531060W2701037527380Jeep Grand Cherokee

Bosch EDC17C79 original files

The Bosch EDC17C79 unit page