Original file

Jeep Grand Cherokee Bosch EDC17C79 0756731060 / 68270624AI

An original (stock) flash read of the Bosch EDC17C79 control unit, fitted in Jeep Grand Cherokee, hardware number 0756731060 and software number 68270624AI, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Grand Cherokee3.0 diesel · 250.0PS / 183.9kW
Control unit
Bosch EDC17C79
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
0756731060
Software number
68270624AI
Bosch part / software
10SW075673
Software / calibration
P_1060_EDC17C79_W271

Technical data

Vehicle
BrandJeep
Car modelGrand Cherokee
Engine3.0 diesel
Power250.0PS / 183.9kW
Control unit
Control unitBosch EDC17C79
ECU makerBosch
Hardware number0756731060
Software number68270624AI
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key278f5e2a3ed3e2d2
Identification read from the file
ECU nameEDC17C79
Read typeCalibration only (data set)
Bosch part / software10SW075673Offset in the file: 0x20001A
Software / calibrationP_1060_EDC17C79_W271Offset in the file: 0x200228
Bosch project identifier (EPK)51/1/EDC17_C79/1060/P_1060//P_1060_EDC17C79_W271///Offset in the file: 0x200228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C79 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0756731060 and software number 68270624AI. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C79

Bosch EDC17C79 original files

The Bosch EDC17C79 unit page