Original file

Dodge Ram Bosch EDC17C79 10SW0331791060W436 / 10SW033179

An original (stock) flash read of the Bosch EDC17C79 control unit, fitted in Dodge Ram, hardware number 10SW0331791060W436 and software number 10SW033179, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Dodge Ram3.0 diesel 245PS
Control unit
Bosch EDC17C79
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
10SW0331791060W436
Software number
10SW033179
Software / calibration
P_1060_EDC17C79_W436_1

Technical data

Vehicle
BrandDodge
Car modelRam
Engine3.0 diesel 245PS
Power245.0PS / 180.2kW
Control unit
Control unitBosch EDC17C79
ECU makerBosch
Hardware number10SW0331791060W436
Software number10SW033179
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key838361f54be65977
Identification read from the file
ECU nameEDC17C79
Read typeOBD read (no boot area)
Bosch part / software10SW033179Offset in the file: 0x14001A
Software / calibrationP_1060_EDC17C79_W436_1Offset in the file: 0x000228
Bosch project identifier (EPK)53/1/EDC17_C79/1060/P_1060//P_1060_EDC17C79_W436_1///Offset in the file: 0x000228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C79 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 10SW0331791060W436 and software number 10SW033179. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C79

HardwareSoftwareVehicles
075673106068270624AIJeep Grand Cherokee
103752738010601037527380Dodge Ram
1060_EDC17C79_N087_11037527380Jeep Grand Cherokee
10SW0026531060W2701037527380Jeep Grand Cherokee
2016MY_DS_L630_8HP70_FDR31037527380Dodge Ram
68138890AH1037538633Jeep Cherokee
68234487AI1037527380Jeep Grand Cherokee
68234487AJ10SW070077Jeep Grand Cherokee

Bosch EDC17C79 original files

The Bosch EDC17C79 unit page