Original file

Jeep Grand Cherokee Bosch EDC17C79 68290792AL / 10SW068069

An original (stock) flash read of the Bosch EDC17C79 control unit, fitted in Jeep Grand Cherokee, hardware number 68290792AL and software number 10SW068069, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Grand Cherokee3.0 diesel 240PS
Control unit
Bosch EDC17C79
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
68290792AL
Software number
10SW068069
Software / calibration
P_1060_EDC17C79_W299

Technical data

Vehicle
BrandJeep
Car modelGrand Cherokee
Engine3.0 diesel 240PS
Power240.0PS / 176.5kW
Control unit
Control unitBosch EDC17C79
ECU makerBosch
Hardware number68290792AL
Software number10SW068069
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key21fc343246a12047
Identification read from the file
ECU nameEDC17C79
Read typeOBD read (no boot area)
Bosch part / software10SW068069Offset in the file: 0x14001A
Software / calibrationP_1060_EDC17C79_W299Offset in the file: 0x000228
Bosch project identifier (EPK)51/1/EDC17_C79/1060/P_1060//P_1060_EDC17C79_W299///Offset in the file: 0x000228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C79 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 68290792AL and software number 10SW068069. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C79

HardwareSoftwareVehicles
68270625AG10SW015824Jeep Cherokee
68270627AE10SW002640Jeep Grand Cherokee
68280880AJ1037527380Dodge Ram
68290792AL1037527380Jeep Grand Cherokee
68290794AE1037527380Jeep Grand Cherokee
68290794AF10SW002574Jeep Grand Cherokee
68290794AF68290794AFJeep Grand Cherokee
68290795AG1037559240Jeep Grand Cherokee

Bosch EDC17C79 original files

The Bosch EDC17C79 unit page