Original file

Jeep Grand Cherokee Bosch EDC17C79 68315560AD / 10SW021126

An original (stock) flash read of the Bosch EDC17C79 control unit, fitted in Jeep Grand Cherokee, hardware number 68315560AD and software number 10SW021126, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Grand Cherokee3.0 diesel 250PS
Control unit
Bosch EDC17C79
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
68315560AD
Software number
10SW021126
Software / calibration
P_1060_EDC17C79_W270

Technical data

Vehicle
BrandJeep
Car modelGrand Cherokee
Engine3.0 diesel 250PS
Power250PS / 183.9kW
Control unit
Control unitBosch EDC17C79
ECU makerBosch
Hardware number68315560AD
Software number10SW021126
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key234593f56d18d0e9
Identification read from the file
ECU nameEDC17C79
Read typeOBD read (no boot area)
Bosch part / software10SW021126Offset in the file: 0x02001A
Software / calibrationP_1060_EDC17C79_W270Offset in the file: 0x044E58
Bosch project identifier (EPK)51/1/EDC17_C79/1060/P_1060//P_1060_EDC17C79_W270///Offset in the file: 0x044E58

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C79 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 68315560AD and software number 10SW021126. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C79

HardwareSoftwareVehicles
68315559AC2015.5MY_WK_B630_8HP70_3.45_CRS2.20_250CV_EU6_DOCJeep Grand Cherokee 3.0 CRD
68315560AC1037527380Jeep Grand Cherokee
68315560AC10SW002653Jeep Grand Cherokee
68315560AD1037527380Jeep Grand Cherokee
68315561AD1037527380Jeep Grand Cherokee
68373992AB1037527380Jeep Grand Cherokee
68422856AD1037560089Jeep Grand Cherokee
755906310601037527380Dodge Ram

Bosch EDC17C79 original files

The Bosch EDC17C79 unit page