Original file

Dodge Ram Bosch EDC17C79 MAD4JUW121XX055 / 1037527380

An original (stock) flash read of the Bosch EDC17C79 control unit, fitted in Dodge Ram, hardware number MAD4JUW121XX055 and software number 1037527380, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Dodge Ram3.0 diesel 240HP
Control unit
Bosch EDC17C79
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
MAD4JUW121XX055
Software number
1037527380
Bosch part / software
1037538662
Software / calibration
P_1060_EDC17C79_W121_1

Technical data

Vehicle
BrandDodge
Car modelRam
Engine3.0 diesel 240HP
Control unit
Control unitBosch EDC17C79
ECU makerBosch
Hardware numberMAD4JUW121XX055
Software number1037527380
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key29e2b7c19b5fbee5
Identification read from the file
ECU nameEDC17C79
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037538662Offset in the file: 0x02001A
Software / calibrationP_1060_EDC17C79_W121_1Offset in the file: 0x043784
Bosch project identifier (EPK)53/1/EDC17_C79/1060/P_1060//P_1060_EDC17C79_W121_1///Offset in the file: 0x043784

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C79 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number MAD4JUW121XX055 and software number 1037527380. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C79

Bosch EDC17C79 original files

The Bosch EDC17C79 unit page