Original file

Jeep Grand Cherokee Bosch EDC17C79 MAW4J4W270XX02H / 10SW002641

An original (stock) flash read of the Bosch EDC17C79 control unit, fitted in Jeep Grand Cherokee, hardware number MAW4J4W270XX02H and software number 10SW002641, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Grand Cherokee3.0 diesel 241PS
Control unit
Bosch EDC17C79
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
MAW4J4W270XX02H
Software number
10SW002641
Software / calibration
P_1060_EDC17C79_W270

Technical data

Vehicle
BrandJeep
Car modelJeep Grand Cherokee
Engine3.0 diesel 241PS
Power241.0PS / 177.3kW
Control unit
Control unitBosch EDC17C79
ECU makerBosch
Hardware numberMAW4J4W270XX02H
Software number10SW002641
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key3a0d0dfe762c8301
Identification read from the file
ECU nameEDC17C79
Read typeOBD read (no boot area)
Bosch part / software10SW002641Offset in the file: 0x14001A
Software / calibrationP_1060_EDC17C79_W270Offset in the file: 0x000228
Bosch project identifier (EPK)51/1/EDC17_C79/1060/P_1060//P_1060_EDC17C79_W270///Offset in the file: 0x000228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C79 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number MAW4J4W270XX02H and software number 10SW002641. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C79

HardwareSoftwareVehicles
MAD4JUW121XX0551037527380Dodge Ram
MAD4JUW221X0551037527380Dodge Ram 3.0 CRD
MADSFST5W175XX01XLDXN1037549735Dodge Ram
MADSFST5W221XX07XLDXN1037559064Dodge Ram
MAW4JDN087XX05H1037530527Chrysler Jeep Grand Cherokee
MAW4JDN087XX10H1037527380Chrysler Jeep Grand Cherokee
MAW4JDN093XX01K1037527380Jeep Grand Cherokee
MAW4JDW159XX02H1037527380Jeep Grand Cherokee, Chrysler

Bosch EDC17C79 original files

The Bosch EDC17C79 unit page