Original file

Baic Tunland Bosch EDC17C81 0363901734 / 10SW0700712003V300

An original (stock) flash read of the Bosch EDC17C81 control unit, fitted in Baic Tunland, hardware number 0363901734 and software number 10SW0700712003V300, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Baic Tunland2.0 · 163.0PS / 119.9kW
Control unit
Bosch EDC17C81
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
0363901734
Software number
10SW0700712003V300
Bosch part / software
10SW070071
Software / calibration
P2003_FOTON_D01_CN6_C81_V300

Technical data

Vehicle
BrandBaic
Car modelTunland
Engine2.0
FuelDiesel
Power163.0PS / 119.9kW
Control unit
Control unitBosch EDC17C81
ECU makerBosch
Hardware number0363901734
Software number10SW0700712003V300
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key4683c1bea12dcc60
Identification read from the file
ECU nameEDC17C81
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / software10SW070071Offset in the file: 0x10001A
Software / calibrationP2003_FOTON_D01_CN6_C81_V300Offset in the file: 0x040200
Bosch project identifier (EPK)64/1/EDC17_C81/0/P1734_EDC17C81//P2003_FOTON_D01_CN6_C81_V300///Offset in the file: 0x040200

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C81 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0363901734 and software number 10SW0700712003V300. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C81

HardwareSoftwareVehicles
C81_EU5_FUDI_P1686_V200FAW
024721161210SW024721
02810331241037560175Huanghai Truck, Dongfeng
031952151410SW031952
035963172210SW035963Isuzu Truck
03679215741037560075JMC Carrying
1409_C81_CB
39105-4A520Hyundai H1 Grand Starex

Bosch EDC17C81 original files

The Bosch EDC17C81 unit page