Original file

JMC Carrying Bosch EDC17C81 0367921574 / 1037560075

An original (stock) flash read of the Bosch EDC17C81 control unit, fitted in JMC Carrying, hardware number 0367921574 and software number 1037560075, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
JMC Carrying2.8 diesel · 115.0PS / 84.6kW
Control unit
Bosch EDC17C81
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
0367921574
Software number
1037560075
Bosch part / software
10SW056585
Software / calibration
P1574_EDC17C81_SHENZHEN_V800

Technical data

Vehicle
BrandJMC
Car modelCarrying
Engine2.8 diesel
Power115.0PS / 84.6kW
Control unit
Control unitBosch EDC17C81
ECU makerBosch
Hardware number0367921574
Software number1037560075
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keyc154d667085c88d2
Identification read from the file
ECU nameEDC17C81
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / software10SW056585Offset in the file: 0x10001A
Software / calibrationP1574_EDC17C81_SHENZHEN_V800Offset in the file: 0x040200
Bosch project identifier (EPK)64/1/EDC17_C81/0/P1574_EDC17C81//P1574_EDC17C81_SHENZHEN_V800///Offset in the file: 0x040200

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C81 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0367921574 and software number 1037560075. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C81

Bosch EDC17C81 original files

The Bosch EDC17C81 unit page