Original file

Isuzu Bosch EDC17C83 0020110000 / 10SW083953

An original (stock) flash read of the Bosch EDC17C83 control unit, fitted in Isuzu, hardware number 0020110000 and software number 10SW083953, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Isuzu
Control unit
Bosch EDC17C83
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0020110000
Software number
10SW083953
Software / calibration
V240

Technical data

Vehicle
BrandIsuzu
Car modelIsuzu
Control unit
Control unitBosch EDC17C83
ECU makerBosch
Hardware number0020110000
Software number10SW083953
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key7adbb1890f58be82
Identification read from the file
ECU nameEDC17C83
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW083953Offset in the file: 0x02001A
Software / calibrationV240Offset in the file: 0x04A67C
Bosch project identifier (EPK)33/1/EDC17_C83/26/P_1830//V240///Offset in the file: 0x04A67C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C83 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0020110000 and software number 10SW083953. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C83

HardwareSoftwareVehicles
10SW073034Isuzu D-Max, Isuzu D-max, Isuzu
10SW083951
10SW083953Isuzu D-Max
10SW083954Isuzu D-Max
015937145010SW015937Isuzu D-Max
015943145010SW015943Isuzu D-Max
015943145098328390Isuzu D-Max
028103447910SW035402Isuzu D-max / Rodeo

Bosch EDC17C83 original files

The Bosch EDC17C83 unit page