Original file

Isuzu D-Max Bosch EDC17C83 0159371450 / 10SW015937

An original (stock) flash read of the Bosch EDC17C83 control unit, fitted in Isuzu D-Max, hardware number 0159371450 and software number 10SW015937, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Isuzu D-Max1.9 · 164.0PS / 121.0kW
Control unit
Bosch EDC17C83
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0159371450
Software number
10SW015937
Software / calibration
V241

Technical data

Vehicle
BrandIsuzu
Car modelD-Max
Engine1.9
FuelDiesel
Power164.0PS / 121.0kW
Control unit
Control unitBosch EDC17C83
ECU makerBosch
Hardware number0159371450
Software number10SW015937
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyc2de556192a053ae
Identification read from the file
ECU nameEDC17C83
Read typeCalibration only (data set)
Bosch part / software10SW015937Offset in the file: 0x08001A
Software / calibrationV241Offset in the file: 0x1F5093
Bosch project identifier (EPK)833/1/EDC17_C83/26/P_1450//V241///Offset in the file: 0x1F5093

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C83 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0159371450 and software number 10SW015937. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C83

HardwareSoftwareVehicles
10SW083951
10SW083953Isuzu D-Max
10SW083954Isuzu D-Max
002011000010SW083953Isuzu
015943145010SW015943Isuzu D-Max
015943145098328390Isuzu D-Max
028103447910SW035402Isuzu D-max / Rodeo
028103686810SW059090

Bosch EDC17C83 original files

The Bosch EDC17C83 unit page