Original file

Isuzu D-Max Bosch EDC17C83 0159431450 / 10SW015943

An original (stock) flash read of the Bosch EDC17C83 control unit, fitted in Isuzu D-Max, hardware number 0159431450 and software number 10SW015943, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Isuzu D-Max1.9 · 163.0PS / 119.9kW
Control unit
Bosch EDC17C83
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0159431450
Software number
10SW015943
Software / calibration
V241

Technical data

Vehicle
BrandIsuzu
Car modelD-Max
Engine1.9
FuelDiesel
Power163.0PS / 119.9kW
Control unit
Control unitBosch EDC17C83
ECU makerBosch
Hardware number0159431450
Software number10SW015943
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key4fbe16d338ff7975
Identification read from the file
ECU nameEDC17C83
Read typeCalibration only (data set)
Bosch part / software10SW015943Offset in the file: 0x08001A
Software / calibrationV241Offset in the file: 0x1F5093
Bosch project identifier (EPK)833/1/EDC17_C83/26/P_1450//V241///Offset in the file: 0x1F5093

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C83 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0159431450 and software number 10SW015943. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C83

HardwareSoftwareVehicles
10SW083953Isuzu D-Max
10SW083954Isuzu D-Max
002011000010SW083953Isuzu
015937145010SW015937Isuzu D-Max
015943145098328390Isuzu D-Max
028103447910SW035402Isuzu D-max / Rodeo
028103686810SW059090
028103905610SW069630Isuzu

Bosch EDC17C83 original files

The Bosch EDC17C83 unit page