Original file

Isuzu D-max / Rodeo Bosch EDC17C83 0281034479 / 10SW035402

An original (stock) flash read of the Bosch EDC17C83 control unit, fitted in Isuzu D-max / Rodeo, hardware number 0281034479 and software number 10SW035402, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Isuzu D-max / Rodeodiesel 163PS
Control unit
Bosch EDC17C83
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0281034479
Software number
10SW035402
Software / calibration
V280

Technical data

Vehicle
BrandIsuzu
Car modelD-max / Rodeo
Enginediesel 163PS
Displacement1.9
Power163.0PS / 119.9kW
Control unit
Control unitBosch EDC17C83
ECU makerBosch
Hardware number0281034479
Software number10SW035402
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyd1b81be6140a6006
Identification read from the file
ECU nameEDC17C83
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW035402Offset in the file: 0x02001A
Software / calibrationV280Offset in the file: 0x044778
Bosch project identifier (EPK)33/1/EDC17_C83/26/P_1450//V280///Offset in the file: 0x044778

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C83 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281034479 and software number 10SW035402. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C83

Bosch EDC17C83 original files

The Bosch EDC17C83 unit page