Original file

Isuzu D-Max Bosch EDC17C83 0435641450 / P1450V280T66P105

An original (stock) flash read of the Bosch EDC17C83 control unit, fitted in Isuzu D-Max, hardware number 0435641450 and software number P1450V280T66P105, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Isuzu D-Max1.9 · 163.0PS / 119.9kW
Control unit
Bosch EDC17C83
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0435641450
Software number
P1450V280T66P105
Bosch part / software
10SW043564
Software / calibration
V280

Technical data

Vehicle
BrandIsuzu
Car modelD-Max
Engine1.9
FuelDiesel
Power163.0PS / 119.9kW
Control unit
Control unitBosch EDC17C83
ECU makerBosch
Hardware number0435641450
Software numberP1450V280T66P105
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keybee894c0dcd044e3
Identification read from the file
ECU nameEDC17C83
Read typeCalibration only (data set)
Bosch part / software10SW043564Offset in the file: 0x08001A
Software / calibrationV280Offset in the file: 0x1F8B57
Bosch project identifier (EPK)833/1/EDC17_C83/26/P_1450//V280///Offset in the file: 0x1F8B57

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C83 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0435641450 and software number P1450V280T66P105. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C83

HardwareSoftwareVehicles
04340414501037558250Isuzu D-Max
043404145010SW043404Isuzu D-Max
043558145010SW043558Isuzu D-Max
0435641450043564Isuzu D-Max
04701314501037558250Isuzu D-Max
047013145010SW047013Isuzu D-Max
0470131450P1450V280T88P106Isuzu D-Max
047052145010SW047052Isuzu D-Max

Bosch EDC17C83 original files

The Bosch EDC17C83 unit page