Original file

Isuzu D-Max Bosch EDC17C83 0470131450 / 10SW047013

An original (stock) flash read of the Bosch EDC17C83 control unit, fitted in Isuzu D-Max, hardware number 0470131450 and software number 10SW047013, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Isuzu D-Max1.9 diesel 163PS
Control unit
Bosch EDC17C83
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0470131450
Software number
10SW047013
Software / calibration
V280

Technical data

Vehicle
BrandIsuzu
Car modelD-Max
Engine1.9 diesel 163PS
Power163.0PS / 119.9kW
Control unit
Control unitBosch EDC17C83
ECU makerBosch
Hardware number0470131450
Software number10SW047013
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyde12faaf95d89239
Identification read from the file
ECU nameEDC17C83
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW047013Offset in the file: 0x02001A
Software / calibrationV280Offset in the file: 0x044778
Bosch project identifier (EPK)33/1/EDC17_C83/26/P_1450//V280///Offset in the file: 0x044778

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C83 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0470131450 and software number 10SW047013. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Isuzu D-MaxFlash4,096.00 KB€15Add to cart
Isuzu D-MaxFlash4,096.00 KB€15Add to cart
Isuzu D-MaxFlash4,096.00 KB€15Add to cart
Isuzu D-MaxFlash2,048.00 KB€15Add to cart
Isuzu D-MaxFlash4,096.00 KB€15Add to cart

All reads of 0470131450 / 10SW047013

Other pairs of Bosch EDC17C83

Bosch EDC17C83 original files

The Bosch EDC17C83 unit page