Original file

Isuzu D-Max Bosch EDC17C83 0470131450 / P1450V280T88P106

An original (stock) flash read of the Bosch EDC17C83 control unit, fitted in Isuzu D-Max, hardware number 0470131450 and software number P1450V280T88P106, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Isuzu D-Max1.9 · 163.0PS / 119.9kW
Control unit
Bosch EDC17C83
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0470131450
Software number
P1450V280T88P106
Bosch part / software
10SW047013
Software / calibration
V280

Technical data

Vehicle
BrandIsuzu
Car modelD-Max
Engine1.9
FuelDiesel
Power163.0PS / 119.9kW
Control unit
Control unitBosch EDC17C83
ECU makerBosch
Hardware number0470131450
Software numberP1450V280T88P106
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key850cb201ae50829c
Identification read from the file
ECU nameEDC17C83
Read typeCalibration only (data set)
Bosch part / software10SW047013Offset in the file: 0x08001A
Software / calibrationV280Offset in the file: 0x1F8B57
Bosch project identifier (EPK)833/1/EDC17_C83/26/P_1450//V280///Offset in the file: 0x1F8B57

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C83 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0470131450 and software number P1450V280T88P106. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C83

HardwareSoftwareVehicles
0435641450043564Isuzu D-Max
0435641450P1450V280T66P105Isuzu D-Max
04701314501037558250Isuzu D-Max
047013145010SW047013Isuzu D-Max
047052145010SW047052Isuzu D-Max
063494183010SW063494Isuzu D-Max
069630183010SW069630Isuzu
073034145010SW073034Isuzu D-max, Isuzu D-Max

Bosch EDC17C83 original files

The Bosch EDC17C83 unit page