Original file

Isuzu D-Max Bosch EDC17C83 0634941830 / 10SW063494

An original (stock) flash read of the Bosch EDC17C83 control unit, fitted in Isuzu D-Max, hardware number 0634941830 and software number 10SW063494, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Isuzu D-Max1.9 163PS
Control unit
Bosch EDC17C83
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0634941830
Software number
10SW063494
Software / calibration
V240

Technical data

Vehicle
BrandIsuzu
Car modelD-Max
Engine1.9 163PS
FuelDiesel
Control unit
Control unitBosch EDC17C83
ECU makerBosch
Hardware number0634941830
Software number10SW063494
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyc0dbba1ce0fd4393
Identification read from the file
ECU nameEDC17C83
Read typeCalibration only (data set)
Bosch part / software10SW063494Offset in the file: 0x08001A
Software / calibrationV240Offset in the file: 0x1FCE40
Bosch project identifier (EPK)33/1/EDC17_C83/26/P_1830//V240///Offset in the file: 0x1FCE40

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C83 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0634941830 and software number 10SW063494. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C83

HardwareSoftwareVehicles
04701314501037558250Isuzu D-Max
047013145010SW047013Isuzu D-Max
0470131450P1450V280T88P106Isuzu D-Max
047052145010SW047052Isuzu D-Max
069630183010SW069630Isuzu
073034145010SW073034Isuzu D-max, Isuzu D-Max
073040145010SW073040Isuzu D-Max
98328390P1450V241T88P102Isuzu D-Max

Bosch EDC17C83 original files

The Bosch EDC17C83 unit page