Original file

Isuzu D-Max Bosch EDC17C83 10SW043557

An original (stock) flash read of the Bosch EDC17C83 control unit, fitted in Isuzu D-Max, software number 10SW043557, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Technical data

Vehicle
BrandIsuzu
Car modelD-Max
Engine1.9 diesel
Fueldiesel
Displacement1.9
Control unit
Control unitBosch EDC17C83
ECU makerBosch
Software number10SW043557
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key847d7a0bd2aac97f
Price€15

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C83 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW043557. A file written to a unit with other numbers can damage it. Not sure? Give your own read to the search above: it is compared by content.

Other pairs of Bosch EDC17C83

HardwareSoftwareVehicles
10SW043406Isuzu D-Max, Isuzu D-max
10SW043408Isuzu D-Max
10SW043410Isuzu D-Max, Isuzu D-max
10SW043411Isuzu D-Max
10SW043558Isuzu D-max / Rodeo, Isuzu D-Max
10SW043562Isuzu D-Max
10SW047013Isuzu D-Max, Isuzu D-max
10SW047015Isuzu D-Max

Bosch EDC17C83 original files

The Bosch EDC17C83 unit page