Original file

Isuzu D-Max Bosch EDC17C83 10SW063494

An original (stock) flash read of the Bosch EDC17C83 control unit, fitted in Isuzu D-Max, software number 10SW063494, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Isuzu D-Max1.9 diesel 164PS
Control unit
Bosch EDC17C83
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Software number
10SW063494
Software / calibration
V240

Technical data

Vehicle
BrandIsuzu
Car modelD-Max
Engine1.9 diesel 164PS
Power164.0PS / 120.6kW
Control unit
Control unitBosch EDC17C83
ECU makerBosch
Software number10SW063494
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyd26eca155591d12b
Identification read from the file
ECU nameEDC17C83
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW063494Offset in the file: 0x02001A
Software / calibrationV240Offset in the file: 0x04A67C
Bosch project identifier (EPK)33/1/EDC17_C83/26/P_1830//V240///Offset in the file: 0x04A67C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C83 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW063494. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Isuzu D-MaxFlash4,096.00 KB€15Add to cart
Isuzu D-MaxFlash4,096.00 KB€15Add to cart
Isuzu D-MaxFlash2,048.00 KB€15Add to cart

All reads of 10SW063494

Other pairs of Bosch EDC17C83

HardwareSoftwareVehicles
10SW047015Isuzu D-Max
10SW047017Isuzu D-max, Isuzu D-max / Rodeo, Isuzu D-Max
10SW047020Isuzu D-max
10SW047052Isuzu D-Max, Isuzu D-max
10SW069628Isuzu D-Max, Isuzu D-max
10SW069630Isuzu D-Max, Isuzu D-max
10SW070366
10SW073034Isuzu D-Max, Isuzu D-max, Isuzu

Bosch EDC17C83 original files

The Bosch EDC17C83 unit page