Original file

Isuzu D-Max Bosch EDC17C83 98328390 / P1450V241T88P102

An original (stock) flash read of the Bosch EDC17C83 control unit, fitted in Isuzu D-Max, hardware number 98328390 and software number P1450V241T88P102, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Isuzu D-Max1.9 · 163.0PS / 119.9kW
Control unit
Bosch EDC17C83
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
98328390
Software number
P1450V241T88P102
Bosch part / software
10SW029988
Software / calibration
V241

Technical data

Vehicle
BrandIsuzu
Car modelD-Max
Engine1.9
FuelDiesel
Power163.0PS / 119.9kW
Control unit
Control unitBosch EDC17C83
ECU makerBosch
Hardware number98328390
Software numberP1450V241T88P102
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keydbc737005b3818c2
Identification read from the file
ECU nameEDC17C83
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW029988Offset in the file: 0x02001A
Software / calibrationV241Offset in the file: 0x044714
Bosch project identifier (EPK)33/1/EDC17_C83/26/P_1450//V241///Offset in the file: 0x044714

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C83 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 98328390 and software number P1450V241T88P102. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C83

HardwareSoftwareVehicles
04701314501037558250Isuzu D-Max
047013145010SW047013Isuzu D-Max
0470131450P1450V280T88P106Isuzu D-Max
047052145010SW047052Isuzu D-Max
063494183010SW063494Isuzu D-Max
069630183010SW069630Isuzu
073034145010SW073034Isuzu D-max, Isuzu D-Max
073040145010SW073040Isuzu D-Max

Bosch EDC17C83 original files

The Bosch EDC17C83 unit page