Original file

Opel Vivaro Bosch EDC17C84 0030581251 / 1037556808

An original (stock) flash read of the Bosch EDC17C84 control unit, fitted in Opel Vivaro, hardware number 0030581251 and software number 1037556808, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Opel Vivaro1.6 diesel
Control unit
Bosch EDC17C84
Read type
OBD read (no boot area)
File
2,560.00 KB · Flash
Hardware number
0030581251
Software number
1037556808
Software / calibration
r170B_8B0_

Technical data

Vehicle
BrandOpel
Car modelVivaro
Engine1.6 diesel
Control unit
Control unitBosch EDC17C84
ECU makerBosch
Hardware number0030581251
Software number1037556808
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key6f8499014e1580ce
Identification read from the file
ECU nameEDC17C84
Read typeOBD read (no boot area)
Bosch part / software1037556808Offset in the file: 0x04001A
Software / calibrationr170B_8B0_Offset in the file: 0x02013C
Bosch project identifier (EPK)39/1/EDC17_C84/15/P_1251//r170B_8B0_///Offset in the file: 0x02013C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C84 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0030581251 and software number 1037556808. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C84

Bosch EDC17C84 original files

The Bosch EDC17C84 unit page