Original file

Renault Capture Bosch EDC17C84 0035341251 / 10SW003534

An original (stock) flash read of the Bosch EDC17C84 control unit, fitted in Renault Capture, hardware number 0035341251 and software number 10SW003534, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Capture1.5 diesel · 90.0PS / 66.2kW
Control unit
Bosch EDC17C84
Read type
Calibration only (data set)
File
2,560.00 KB · Flash
Hardware number
0035341251
Software number
10SW003534
Vehicle maker's hardware number
237107476R
Software / calibration
r170B_7F0_

Technical data

Vehicle
BrandRenault
Car modelCapture
Engine1.5 diesel
Power90.0PS / 66.2kW
Control unit
Control unitBosch EDC17C84
ECU makerBosch
Hardware number0035341251
Software number10SW003534
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keyda6aad3fc17134e7
Identification read from the file
ECU nameEDC17C84
Read typeCalibration only (data set)
Bosch part / software10SW003534Offset in the file: 0x02001A
Vehicle maker's hardware number237107476ROffset in the file: 0x2234AA
Software / calibrationr170B_7F0_Offset in the file: 0x02013C
Bosch project identifier (EPK)39/1/EDC17_C84/15/P_1251//r170B_7F0_///Offset in the file: 0x02013C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C84 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0035341251 and software number 10SW003534. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C84

HardwareSoftwareVehicles
00305812511037556808Opel Vivaro
0030581251MCE9545TGLMRH73671673Opel Vivaro
003339125110SW0033391251_720Renault Kadjar
003342125110SW0033421251_720Renault Kadjar
004360125110SW004360Renault Talisman
004360125110SW0094401251_830Renault Megane 4
0043611251004361Renault Talisman
004361125110SW004361Renault Talisman

Bosch EDC17C84 original files

The Bosch EDC17C84 unit page