Original file

Nissan X-Trail Bosch EDC17C84 0052151251 / MCE1CC41073B21CC41073

An original (stock) flash read of the Bosch EDC17C84 control unit, fitted in Nissan X-Trail, hardware number 0052151251 and software number MCE1CC41073B21CC41073, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Nissan X-Trail1.6 diesel · 130.0PS / 95.6kW
Control unit
Bosch EDC17C84
Read type
Calibration only (data set)
File
2,560.00 KB · Flash
Hardware number
0052151251
Software number
MCE1CC41073B21CC41073
Bosch part / software
10SW005215
Vehicle maker's hardware number
237014CC1D
Software / calibration
r170B_720_

Technical data

Vehicle
BrandNissan
Car modelX-Trail
Engine1.6 diesel
Power130.0PS / 95.6kW
Control unit
Control unitBosch EDC17C84
ECU makerBosch
Hardware number0052151251
Software numberMCE1CC41073B21CC41073
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keyeb87e54cc0e6eb19
Identification read from the file
ECU nameEDC17C84
Read typeCalibration only (data set)
Bosch part / software10SW005215Offset in the file: 0x02001A
Vehicle maker's hardware number237014CC1DOffset in the file: 0x223750
Software / calibrationr170B_720_Offset in the file: 0x02013C
Bosch project identifier (EPK)39/1/EDC17_C84/15/P_1251//r170B_720_///Offset in the file: 0x02013C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C84 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0052151251 and software number MCE1CC41073B21CC41073. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C84

HardwareSoftwareVehicles
004611125110SW004611Nissan
004611125110SW0126571251_730Nissan Qashqai
00520612511037552698Nissan Qashqai
00521512511037552698Nissan X-Trail
005738125110SW0114321251_7I0Renault Clio IV
005738125110SW0204851251_7I0Renault Clio IV
0063321251237107632RRenault Clio IV
0066141251006614Nissan Qashqai

Bosch EDC17C84 original files

The Bosch EDC17C84 unit page