Original file

Fiat Talento Bosch EDC17C84 0110191251 / 10SW0085091251_8E0

An original (stock) flash read of the Bosch EDC17C84 control unit, fitted in Fiat Talento, hardware number 0110191251 and software number 10SW0085091251_8E0, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Talento1.6 137HP
Control unit
Bosch EDC17C84
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
0110191251
Software number
10SW0085091251_8E0
Bosch part / software
10SW008509
Software / calibration
r170B_8E0_

Technical data

Vehicle
BrandFiat
Car modelTalento
Engine1.6 137HP
FuelDiesel
Control unit
Control unitBosch EDC17C84
ECU makerBosch
Hardware number0110191251
Software number10SW0085091251_8E0
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key2cfdb9681b535257
Identification read from the file
ECU nameEDC17C84
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / software10SW008509Offset in the file: 0x04001A
Software / calibrationr170B_8E0_Offset in the file: 0x02013C
Internal build stringCB_015_TC1782_2.15.0Offset in the file: 0x000100
Bosch project identifier (EPK)39/1/EDC17_C84/15/P_1251//r170B_8E0_///Offset in the file: 0x02013C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C84 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0110191251 and software number 10SW0085091251_8E0. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C84

HardwareSoftwareVehicles
011018125110SW008509Renault Trafic
011018125110SW011018Opel Vivaro
0110181251MCE8457TGLMRH83491673Fiat Talento
011019125110SW008509Renault Traffic III
011019125110SW011019Opel Vivaro
0111751251MCE2303TGLMRH81971673Opel
01117612511037556808Renault Traffic III, Renault Traffic, Renault Vivaro
0111761251MCE9545TGLMRH91971673Renault Traffic III

Bosch EDC17C84 original files

The Bosch EDC17C84 unit page