Original file

Dacia Sandero Bosch EDC17C84 0114011251 / 10SW011401

An original (stock) flash read of the Bosch EDC17C84 control unit, fitted in Dacia Sandero, hardware number 0114011251 and software number 10SW011401, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Dacia Sandero1.5 diesel 90PS
Control unit
Bosch EDC17C84
Read type
Calibration only (data set)
File
2,560.00 KB · Flash
Hardware number
0114011251
Software number
10SW011401
Vehicle maker's hardware number
237107632R
Software / calibration
r170B_7H0_

Technical data

Vehicle
BrandDacia
Car modelSandero
Engine1.5 diesel 90PS
Control unit
Control unitBosch EDC17C84
ECU makerBosch
Hardware number0114011251
Software number10SW011401
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key03e87e5107137c35
Identification read from the file
ECU nameEDC17C84
Read typeCalibration only (data set)
Bosch part / software10SW011401Offset in the file: 0x02001A
Vehicle maker's hardware number237107632ROffset in the file: 0x2234AA
Software / calibrationr170B_7H0_Offset in the file: 0x02013C
Bosch project identifier (EPK)39/1/EDC17_C84/15/P_1251//r170B_7H0_///Offset in the file: 0x02013C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C84 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0114011251 and software number 10SW011401. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C84

HardwareSoftwareVehicles
0111751251MCE2303TGLMRH81971673Opel
01117612511037556808Renault Traffic III, Renault Traffic, Renault Vivaro
0111761251MCE9545TGLMRH91971673Renault Traffic III
0111771251MCE6863TGLMRH02971673Opel Vivaro
0122341251MCE2CC41073B26CC41073Nissan X-Trail
012235125110SW012235Nissan X-Trail
012814125110SW0220561251_780Nissan X-Trail
012814125110SW0220581251_780Nissan X-Trail

Bosch EDC17C84 original files

The Bosch EDC17C84 unit page