Original file

Renault Koleos Bosch EDC17C84 0184361251 / MCE0852TGLMRH03111673

An original (stock) flash read of the Bosch EDC17C84 control unit, fitted in Renault Koleos, hardware number 0184361251 and software number MCE0852TGLMRH03111673, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Koleos2.0 diesel 175PS
Control unit
Bosch EDC17C84
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
0184361251
Software number
MCE0852TGLMRH03111673
Bosch part / software
10SW018436
Software / calibration
r170B_A5C_

Technical data

Vehicle
BrandRenault
Car modelKoleos
Engine2.0 diesel 175PS
Control unit
Control unitBosch EDC17C84
ECU makerBosch
Hardware number0184361251
Software numberMCE0852TGLMRH03111673
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keye07056a4eb042a20
Identification read from the file
ECU nameEDC17C84
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / software10SW018436Offset in the file: 0x04001A
Software / calibrationr170B_A5C_Offset in the file: 0x02013C
Internal build stringCB_015_TC1782_2.15.0Offset in the file: 0x000100
Bosch project identifier (EPK)39/1/EDC17_C84/15/P_1251//r170B_A5C_///Offset in the file: 0x02013C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C84 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0184361251 and software number MCE0852TGLMRH03111673. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C84

HardwareSoftwareVehicles
0174911251MCE1CC41073B24CC41073Nissan X-Trail
017552125110SW017552Renault Koleos
0182881251MCE4489TGLMRH67401673Renault Espace
018436125110SW0214421251_A5CRenault Koleos
018439125110SW018439Nissan X-Trail
0186921251MCE4301TGLMRH30801673Renault Clio
018745125110SW018745Renault Talisman
018824125110SW018824Nissan X-Trail

Bosch EDC17C84 original files

The Bosch EDC17C84 unit page