Original file

Renault Megane Bosch EDC17C84 0281032928 / 10SW008212

An original (stock) flash read of the Bosch EDC17C84 control unit, fitted in Renault Megane, hardware number 0281032928 and software number 10SW008212, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Megane1.6 diesel 130PS
Control unit
Bosch EDC17C84
Read type
Calibration only (data set)
File
2,560.00 KB · Flash
Hardware number
0281032928
Software number
10SW008212
Vehicle maker's hardware number
237107893R
Software / calibration
r170B_830_

Technical data

Vehicle
BrandRenault
Car modelMegane
Engine1.6 diesel 130PS
Power130.0PS / 95.6kW
Control unit
Control unitBosch EDC17C84
ECU makerBosch
Hardware number0281032928
Software number10SW008212
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key3365fca85d6f85a3
Identification read from the file
ECU nameEDC17C84
Read typeCalibration only (data set)
Bosch part / software10SW008212Offset in the file: 0x02001A
Vehicle maker's hardware number237107893ROffset in the file: 0x223678
Software / calibrationr170B_830_Offset in the file: 0x02013C
Bosch project identifier (EPK)39/1/EDC17_C84/15/P_1251//r170B_830_///Offset in the file: 0x02013C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C84 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281032928 and software number 10SW008212. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C84

HardwareSoftwareVehicles
028103281110SW011410Dacia Duster
028103282710SW006609Nissan Qashqai
028103292710SW038254Renault Talisman
028103292810SW004360Renault TALISMAN
028103311910SW011416Renault Clio IV
028103311910SW016670Renault Clio IV
028103311910SW020058Dacia Duster
028103311910SW032483Renault Clio IV

Bosch EDC17C84 original files

The Bosch EDC17C84 unit page