Original file

Opel Vivaro 2017y 1.6L Bosch EDC17C84 0281033357 / 10SW011005

An original (stock) flash read of the Bosch EDC17C84 control unit, fitted in Opel Vivaro 2017y 1.6L, hardware number 0281033357 and software number 10SW011005, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Opel Vivaro 2017y 1.6L1.6
Control unit
Bosch EDC17C84
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
0281033357
Software number
10SW011005
Bosch part / software
10SW008509
Software / calibration
r170B_8E0_

Technical data

Vehicle
BrandOpel
Car modelVivaro 2017y 1.6L
Engine1.6
Control unit
Control unitBosch EDC17C84
ECU makerBosch
Hardware number0281033357
Software number10SW011005
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
From the file nameOpel Vivaro 2017y 237108353R
File keya7048c78a4b21363
Identification read from the file
ECU nameEDC17C84
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / software10SW008509Offset in the file: 0x04001A
Software / calibrationr170B_8E0_Offset in the file: 0x02013C
Internal build stringCB_015_TC1782_2.15.0Offset in the file: 0x000100
Bosch project identifier (EPK)39/1/EDC17_C84/15/P_1251//r170B_8E0_///Offset in the file: 0x02013C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C84 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281033357 and software number 10SW011005. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C84

HardwareSoftwareVehicles
028103311910SW016670Renault Clio IV
028103311910SW020058Dacia Duster
028103311910SW032483Renault Clio IV
028103335710SW008509Fiat Talento, Fiat Traffic, Renault
028103388610SW020706Nissan Qashqai
028103400910SW014383Nissan Micra
028103403710SW014336Fiat Talento, Fiat Trafic, Renault
028103403710SW039575Fiat Talento, Fiat Vivaro, Opel

Bosch EDC17C84 original files

The Bosch EDC17C84 unit page