Original file

Fiat Talento Bosch EDC17C84 0281834037 / 10SW039585

An original (stock) flash read of the Bosch EDC17C84 control unit, fitted in Fiat Talento, hardware number 0281834037 and software number 10SW039585, 2,432.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Talento125PS
Control unit
Bosch EDC17C84
Read type
Calibration only (data set)
File
2,432.00 KB · Flash
Hardware number
0281834037
Software number
10SW039585
Software / calibration
r170B_8F0_

Technical data

Vehicle
BrandFiat
Car modelTalento
Engine125PS
FuelDiesel
Displacement1.6
Power125.0PS / 91.9kW
Control unit
Control unitBosch EDC17C84
ECU makerBosch
Hardware number0281834037
Software number10SW039585
File
File typeOriginal flash read
File size2,432.00 KB (2,490,368 bytes)
File keyfb30a68b0e20ab07
Identification read from the file
ECU nameEDC17C84
Read typeCalibration only (data set)
Bosch part / software10SW039585Offset in the file: 0x00001A
Software / calibrationr170B_8F0_Offset in the file: 0x00013C
Bosch project identifier (EPK)39/1/EDC17_C84/15/P_1251//r170B_8F0_///Offset in the file: 0x00013C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C84 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281834037 and software number 10SW039585. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C84

HardwareSoftwareVehicles
028103429110SW024080Renault Captur
028103532510SW034836Renault Clio IV
028103580610SW035077Renault Captur
028103623810SW046917Renault Captur
0321371251CE8906TGLMROpel Vivaro
0321371251MCE8906TGLMRH42421673Fiat Talento
0321411251032141Renault Traffic III
0321411251MCE5787TGLMRH22421673Opel Vivaro

Bosch EDC17C84 original files

The Bosch EDC17C84 unit page