Original file
Renault Clio IV 1.5 dCi 90 Bosch EDC17C84 10SW003006 1251_7H0 / 10SW018692 1251_7I0
An original (stock) flash read of the Bosch EDC17C84 control unit, fitted in Renault Clio IV 1.5 dCi 90, hardware number 10SW003006 1251_7H0 and software number 10SW018692 1251_7I0, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Renault Clio IV 1.5 dCi 901.5 diesel 90.0PS / 66.2kW
- Control unit
- Bosch EDC17C84
- Read type
- Full read (boot area included)
- File
- 2,560.00 KB · Flash
- Hardware number
- 10SW003006 1251_7H0
- Software number
- 10SW018692 1251_7I0
- Bosch part / software
- 10SW018692
- Vehicle maker's hardware number
- 237108281R
- Software / calibration
- r170B_7I0_
Technical data
| Brand | Renault |
|---|---|
| Car model | Clio IV 1.5 dCi 90 |
| Engine | 1.5 diesel 90.0PS / 66.2kW |
| Control unit | Bosch EDC17C84 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 10SW003006 1251_7H0 |
| Software number | 10SW018692 1251_7I0 |
| File type | Original flash read |
|---|---|
| File size | 2,560.00 KB (2,621,440 bytes) |
| File key | 66ca9c92af8f1c47 |
| ECU name | EDC17C84 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1782 | |
| Bosch part / software | 10SW018692 | Offset in the file: 0x04001A |
| Vehicle maker's hardware number | 237108281R | Offset in the file: 0x2234D2 |
| Software / calibration | r170B_7I0_ | Offset in the file: 0x02013C |
| Internal build string | CB_015_TC1782_2.9.1 | Offset in the file: 0x000100 |
| Bosch project identifier (EPK) | 39/1/EDC17_C84/15/P_1251//r170B_7I0_/// | Offset in the file: 0x02013C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17C84 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 10SW003006 1251_7H0 and software number 10SW018692 1251_7I0. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17C84
| Hardware | Software | Vehicles |
|---|---|---|
| 0698991251 | MCE9082TGLMRH88471673 | Renault Scenic |
| 0806561251 | 080656 | Renault Trafic |
| 0994361251 | CE8906TGLMR | Renault Traffic |
| 10375526981 | 1037552698 | Nissan Qashqai |
| 10SW0054601490_130 | 10SW005460 | Nissan NV200 |
| 10SW0205361251_7G0 | 020536 | Renault Kangoo |
| 10SW034507170C_250 | 10SW034507 | Renault Clio IV |
| 10SW0348361251_7M0 | 10SW034836 | Renault Clio |