Original file

Nissan X-Trail Bosch EDC17C84 10SW012235

An original (stock) flash read of the Bosch EDC17C84 control unit, fitted in Nissan X-Trail, software number 10SW012235, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Technical data

Vehicle
BrandNissan
Car modelX-Trail
Engine1.7 diesel 110PS
Fueldiesel
Displacement1.7
Power110PS / 80.9kW
Control unit
Control unitBosch EDC17C84
ECU makerBosch
Software number10SW012235
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keye9fb9057e5e6d6d0
Price€15

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C84 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW012235. A file written to a unit with other numbers can damage it. Not sure? Give your own read to the search above: it is compared by content.

Other pairs of Bosch EDC17C84

HardwareSoftwareVehicles
10SW007545Renault Kangoo
10SW008509Fiat Talento
10SW011177Renault
10SW011405Dacia Dokker
10SW012657Nissan Qashqai
10SW012658Nissan Qashqai
10SW012772Nissan Qashqai
10SW012814Nissan X-Trail, Nissan Qashqai

Bosch EDC17C84 original files

The Bosch EDC17C84 unit page